Environmental Sealing; Performance Specifications; Parent Products; Navic - Jireh PREAMP CXA032 Manual

2.1.4. Environmental Sealing

Dust-tight, watertight (not submersible).

2.1.5. Performance Specifications

Gain
Bandwidth
Output Impedance
Output Voltage
Battery Life

2.2. Parent Products

When the Preamp is used with one of the Parent
Products listed in this section and if the Preamp's use
modifies the product specifications (i.e. intended use,
power requirements, etc.) of the Parent Product, the
modifications are shown here. The specifications listed
here supersede those of the Parent Product's. If no
specifications are listed here, the specifications of the
Parent Products remain effective.
These Parent Products have a user manual of their own,
and shall be referred to for their product specifications.

2.2.1. NAVIC

CXG023-
The NAVIC has a user manual of its own, and shall be
referred to for the NAVIC'S specifications. The use of
the Preamp with the NAVIC does not modify the NAVIC
specifications.
The Preamp is intended to be used by persons who
have read and understand this user manual as well as,
when applicable, the user manual of the relevant Parent
Product's.
Selectable (30dB, 40dB, 50dB, 60dB)
30 kHz to 30 MHz
50 Ω
4 Vpk-pk into 50 Ω Load
8-12 Hours Continuous Use with
Standard Alkaline 9V Battery
PAGE 5 of 24 CX0502 Rev 00.4