Leonard LHN1313X User Manual page 21

Step 5 Turn the fasteners by 90° and
remove them from their seats.
Step 7 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not
clean the glass panels in the dishwasher.
Step 8 After cleaning, install the glass panel and the oven door.
When installed correctly the door trim
clicks.
Make sure that you install the internal glass
panel in the seats correctly.
How to replace: Lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
90°
Before you replace the lamp:
Step 2
Disconnect the oven from
the mains.
Step 6 First lift carefully and then re‐
move the glass panel.
1
Put a cloth on the bottom of
Leonard 21
2
A
Step 3
the cavity.