Table of Contents
Advertisement
JCY-1900/1950 VDR Service Manual
CAUTION
This equipment has warning labels.
Do not try to remove, break or modify the label.
Do not install the equipment on the location where infringed by water, humidity, steam, dust, or
soot.
Otherwise, it may cause a fire, electric shock, or malfunction.
Do not touch this equipment, if hands or gloves are wet with water.
Otherwise, it may cause an electric shock, or a malfunction.
Be sure to hold power supply plug when pulling it out of outlet.
Pulling the power cable without holding the plug may damage the cable and may cause a fire or
an electric shock.
Although the shape of UTILITY OUTLET is for 100VAC, it directly outputs the voltage (100 to
220VAC) that is being input to the RCU. Do not connect a equipment for 100VAC, if 220VAC is
being input. Otherwise, a malfunction may occur.
If the equipment is splashed either with water, wipe it dry immediately.
Otherwise, it may cause a failure or operational malfunctions.
Do not use any organic solvents such as thinner or benzine to clean the surface. These agents
can damage the surface coating.
Be sure to remove dirt and dust from the surface and wipe it using a clean dry cloth.
Do not carry out the tap of the screen by the sharp object.
Otherwise, the screen may be damaged.
vii
DOC No. 7ZPNA4409
Hide quick links:
Advertisement
Table of Contents
