Fire And Explosion Hazard; Noise Hazard; High Voltage Hazard - TEXA eLight ONE Technical Manual

2.2.6 Fire and Explosion Hazard

The following are potential fires and / or explosion hazards:
• The types of fuel used by the vehicle and the vapours released by these
fuels.
• The refrigerants used by the A/C system.
• The acid in the vehicle batteries.
Safety Precautions:
• Let the engine cool.
• Do NOT smoke near the vehicle.
• Do NOT expose the vehicle to open flames.
• Make sure that the electrical connections are all well insulated and firmly in place.
• Collect any fuel that might have spilled.
• Collect any refrigerant that might have spilled.
• Make sure you are always working in an environment equipped with a good
ventilation and air extraction system.
• Always activate the air extraction system when working in closed environments.
• Avoid causing sparks when connecting cables to the battery.

2.2.7 Noise Hazard

Loud noises that may occur within the workplace, especially during
service operations may damage the operator's hearing.
Safety Precautions:
• Protect your ears with suitable protective ear wear.

2.2.8 High Voltage Hazard

The voltage supply from the mains that powers the devices in the
workplace and the voltage within the vehicle starter system is a
potential shock hazard to the operator.
Safety Precautions:
• Make sure the electrical system in the workplace is compliant to current national
standards.
• Make sure the device being used is connected to ground.
• Cut off the power supply voltage before connecting or disconnecting cables.
• Do NOT touch the high voltage cables when the engine is on.
• Make sure you are well insulated from the ground when handling/operating the
tools.
58