Installing The Side Trim Strips - Blomberg DWT37300 Installation Manual

Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
 Make sure the dishwasher is plumb and
 Turning the screwdriver in the direction of the
T20
 Turning the screwdriver in the direction of the

6.4 INSTALLING THE SIDE TRIM STRIPS

1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the side walls (Figure B).
Notice :
notice dishwasher can be placed with a small
clearance under the counter top.
black arrows will bring the dishwasher back feet
up.
white arrows will take the dishwasher rear feet
down.
8
USA