Troubleshooting - PRO-PULSE GT1018 Operator's Manual

TROUBLESHOOTING

Problem
Product does not reach
full power
Trimmer Does Not Start
Unsatisfactory result
34 GT1018
Possible Cause
Extension cord not suitable
for operation with this product
Power source (e.g. generator)
has too low voltage
Air vents are blocked
No Main Power
On/off Switch Defective
Worn Carbon Brushes
Motor Defective
Trimming blade worn
Remedy
Use a proper extension cord
Connect to another power source
Clean the air vents
Check Power Cord and Plug
Contact Customer service for
examination and/or repair.
Replace with a new Trimming blade