Kenwood FP630 Series Manual page 9

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF
THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.
Problem
The processor will not operate.
Liquidiser leaking from blade assembly base.
Poor performance of tools/attachments
troubleshooting guide
Cause
No Power.
Liquidiser outlet cover not fitted.
Bowl lid not locked on correctly.
Liquidiser not locked on correctly.
Seal missing
Seal incorrectly fitted
Seal damaged.
Refer to hints in relevant "Using the attachment" section. Check attachments are
assembled correctly.
7
Solution
Check processor is plugged in.
When using the processor bowl the
outlet cover must be fitted and
locked on or the processor will not
operate.
The processor and liquidiser will
not operate if the bowl lid is not
fitted correctly.
The liquidiser will not operate if
fitted incorrectly.
If none of the above check the
fuse/circuit breaker in your home.
Check seal is fitted correctly and not
damaged. Contact Customer Care
for a replacement seal.