English - Braun 5 Series Manual

English

Our products are designed to meet the highest
standards of quality, functionality and design.
Thank you for your trust in Braun's quality and we
hope you enjoy your new Braun shaver.
Please read the use instructions carefully and
completely before using the appliance.
Warning
Your appliance is provided with a special cord set,
which has an integrated Safety Extra Low Voltage
power supply. Do not exchange or tamper with any
part of it, otherwise there is risk of an electric shock.
Only use the special cord set provided with your
appliance.
Do not shave with a damaged foil or cord.
This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are given supervision by a
person responsible for their safety. In general, we
recommend that you keep the appliance out of
reach of children. Children should be supervised to
ensure that they do not play with the appliance.
Oil bottle
(models 5040s w&d/5030s/5020s)
Keep out of reach of children. Do not swallow. Do not
apply to eyes. Dispose of properly when empty.
Clean&Charge Station
(models 5090cc/5070cc/5050cc)
To prevent the cleaning fluid from leaking, ensure
that the Clean&Charge Station is placed on a flat
surface. When a cleaning cartridge is installed, do
not tip, move suddenly or transport the station in any
way as cleaning fluid might spill out of the cartridge.
Do not place the station inside a mirror cabinet,
nor place it on a polished or lacquered surface.
The cleaning cartridge contains a highly flammable
liquid so keep it away from sources of ignition. Do
not expose to direct sunlight and cigarette smoking
nor store it over a radiator.
Shaver
1 Foil & Cutter cassette
2 Cassette release button
3 MultiHeadLock switch
4 On/off switch
5 Shaver display
6 Long hair trimmer
7 Shaver-to-station contacts
8a Release button for long hair trimmer
8b Model number of shaver
9 Shaver power socket
10 Special cord set
11a Brush
11b Hard travel case
11c Protection cap
6
First use and Charging
Prior to first use remove the protection foil from the
shaver display and connect the shaver to an electrical
outlet using the special cord set (10).
Charging and basic operating information
• A full charge provides up to 45 minutes of cordless
shaving time. This may vary according to your
beard growth and environmental temperature.
• Recommended ambient temperature for charging is
5 °C to 35 °C. The battery may not charge properly
or at all under extreme low or high temperatures.
Recommended ambient temperature for storage
and shaving is 15 °C to 35 °C.
• Do not expose the appliance to temperatures
higher than 50 °C for extended periods of time.
• When the shaver will be connected to an electrical
outlet, it may take some minutes until the display
illuminates.
Shaver display
Charge status
The shaver display (5) shows the charge status of
the battery.
During charging: The battery symbol will blink.
(5090cc: The respective battery segment will blink.)
Fully charged (shaver is connected to an electrical
outlet): The battery symbol will light up for a few
seconds. (5090cc: All battery symbols will light up
for a few seconds.)
Low charge
The low-charge light
battery is running low. You should be able to finish
your shave. With switching off the shaver a beep
sound reminds of the low charge status.
Cleaning status
(models 5090cc/5070cc/5050cc only)
The cleaning indicator
needs to be cleaned in the Clean&Charge Station.
Travel lock
The lock symbol lights up when the shaver has
been locked to avoid unintended starting of the
motor (e.g. for storing it in a suitcase).
Using the shaver
Press the on/off switch (4) to operate the shaver.
Tips for a perfect dry shave
For best results, Braun recommends you to follow
3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at the right angle
(90°) to your skin.
3. Stretch your skin and shave against the direction
of your beard growth.
flashes red when the
lights up, when the shaver
(see fig. A)