Blodgett KLS-100E Specifications page 2

KLS-E TRI-LEG STATIONARY KETTLE
MODEL A B
KLS-20E 21[533] 18[457]
KLS-30E 24[610] 20[508]
KLS-40E 26[660] 22.5[572]
KLS-60E 29.5[749] 26[660]
KLS-80E 33[838] 28[711]
KLS-100E 35.5[902] 30[762]
SHORT FORM SPECIFICATIONS
Provide Blodgett model KLS-20E (20 gallon), KLS-30E (30 gallon), KLS-40E (40 gallon), KLS-60E (60 gallon), KLS-80E (80 gallon) or KLS-100E (100 gallon) electrically heated tri-leg
stationary kettle. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for superior heat circulation. The kettle shall be supported on stainless steel legs fitted with 4 hole adjustable flanged feet for
securing to floor. Construction shall be of all welded satin finish 304 stainless steel. The interior of 20 through 40 gallon models shall be stainless steel type 316 for high acid content cook-
ing. The controls shall be integrally mounted and shall include a power switch, thermostat with range of 165-285°F (74-140°C), a cook indicator light, pressure gauge, safety valve, low
water light and low water shut off. The elements shall be removable. Unit shall have a 2" draw off valve. 20, 30 and 40 gallon units shall have hinged, stainless steel domed cover. 60,
80 and 100 gallon units shall have a spring assist hinged stainless steel domed cover. Unit shall be ASME code stamped and National Board registered. Provide options and accessories
as indicated.
AVAILABLE kW
MODEL STD OPT
KLS-20E 12 N/A
KLS-30E 15 N/A
KLS-40E 18 24
KLS-60E 18 24, 33
KLS-80E 18 24, 33
KLS-100E 24 33
NOTE: The company reserves the right to make substitutions of components without prior notice.
www.blodgett.com 44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Printed in U.S.A.
C D E
38[965] 23.75[629] 18.5[470]
38[965] 27.75[705] 20[508]
38[965] 29.75[756] 21[533]
42[1067] 33.75[857] 19[483]
45[1143] 36.75[933] 20.5[521]
48[1219] 40[1016] 22[559]
AMPS PER LINE
KW PHASE 208V 220V
1 57.7 54.4
12
3 33.3 31.5
1 72.1 68.2
15
3 41.6 39.4
18 3 50.0 47.2
24 3 66.6 63.0
33 3 91.6 86.6
NOTE: FOR COMMERCIAL USE ONLY
F (2") F (3") G (2")
14.75[375] 15.5[395] 18[457]
16[406] 16.5[419] 15.75[400] 15.25[387]
17[432] 18[457] 13.5[343]
18[457] 19.25[489] 14[356]
19.5[495] 20.5[521] 15[381]
21.5[546] 22.5[572] 15[381]
240V 380V 415V
50.0 N/A N/A
28.9 18.2 16.7
62.5 N/A N/A
36.1 22.8 20.9
43.3 27.3 25
57.7 36.5 33.4
79.4 50.1 45.9
BLODGETT
APPROVAL/STAMP
G (3") H J
17.5[445] 14[356] 21[533]
12.5[318] 19[483]
13[330] 9[229] 17[432]
13.5[343] 11[280] 17.25[438]
14.5[368] 12.75[324] 18[458]
14.5[368] 13[330] 20.5[521]
POWER CONNECTION:
Refer to data plate.
480V
N/A
MAXIMUM PRESSURE:
14.4
All models
N/A
SHIPPING INFORMATION:
18.0
Approx. Weight:
21.7
KLS-20E 250 lbs. (113 kg)
28.9
KLS-30E 275 lbs. (125 kg)
39.7
KLS-40E 305 lbs. (138 kg)
KLS-60E 440 lbs. (200 kg)
KLS-80E 495 lbs. (225 kg)
KLS-100E 530 lbs. (240 kg)
K L
60.5[1537] 16.75[425]
63.5[1613] 18.3[465]
65[1651] 19.9[506]
75[1905] 23.125[587]
81[2058] 26.25[667]
87[2210] 29.438[748]
50 PSI (345 kPa)
P/N S00003 Rev E (12/06)