Specifications - Philips Wake-up Light Manual

English
10
Problem
The alarm went off
yesterday, but it did not
go off today.
I wanted to snooze, but
the alarm did not go off
again after 9 minutes.
The light wakes me too
early.
The light wakes me too
late.
HF3532, HF3531, HF3521: I
am unable to switch the
midnight light function
on/off.

Specifications

Adapter
Manufacturer
Type number
Rated input voltage
Rated input frequency
Rated output voltage
Rated output current
Rated output power
No-load power
Efficiency class
Safety classification
Solution
Perhaps you switched off the alarm function.The alarm icon is visible on
the display when the alarm function is active.
Perhaps you set a volume level and/or light intensity level that is too low.
Set a higher volume level and/or light intensity level in your wake-up
profile (see user manual for more information).
Perhaps there was a power failure that lasted longer than the time back-
up. The set clock time is lost. You have to set the correct clock time again.
Tap on the top of the Wake-up Light to snooze. If you press the alarm
button, the FM button or the MENU button, the alarm function will be
deactivated.
Perhaps the light intensity level you have set is not appropriate for you.
Try a lower light intensity level if you wake up too early. If light intensity 1
is not low enough, move the appliance further away from the bed.
Perhaps the appliance is positioned at a lower level than your head.
Make sure the appliance is located at a height at which the light is not
blocked by your bed, duvet or pillow. Also make sure the appliance is not
placed too far away.
If you are unable to switch the midnight light on or off, try tapping faster
or slower on top of the device.
PHILIPS
HF12
100 - 240 Vac
50 / 60 Hz
24.0 Vdc
0.5 A
12.0 W
<0.1 W
VI
Class II power supply