Ningbo VSETT 8 User Manual page 25

Vsett display operation and programming
Text
Press the power button for [7] seconds to turn on/off the scooter. then use NFC card to active it The scooter turns off
automatically if not used for 90 seconds
While stationary, and with the power on, press the [5] & [6] button to cycle through the three different speed levels 1
to 3.Use the throttle to control the speed within each speed level.
While power is on, press and hold Front Light button to turn on or off headlight.
While stationary, and with the power on, press and release the [7] button to cycle through the following data: ODO
(lifetime mileage),TRIP mileage, VOLTAGE level, ELECTRICAL CURRENT level and ERROR CODE.
While at maximum speed, press the Turbo / NOz [11] button to get a short boost while riding
Vsett display operation and programming