Table of Contents
Advertisement
Vsett display operation and programming
1. When it is shutdown, Long-press - hold button continuously for 2s
to turn on the power. When it is power on ,It can change interface
between the ODO、TRIP、VOL, by pressing
for short time.
2. When it is power on, Long-press - hold button continuously for 2s
to turn off, Press
to change gear.
3. Long-press
and
to enter P-code menu - refer to functions on page 18.
Enter the menu setting interface, press
or
to increase or decrease the value (long press
to change the
direction of the addition or subtraction of the value, and "A" on the left indicates the increase value, and "D" on the left indicates the
decrease value), after the modification is finished;Press
to switch to the next parameter and save the value of the previous
parameter;After parameter modification, long press
+
again to exit the setting interface, or wait for 8 seconds for
automatic exit and save parameters.
Vsett display operation and programming
Hide quick links:
Advertisement
Table of Contents
