Related Manuals for Ningbo VSETT EAGLE
Summary of Contents for Ningbo VSETT EAGLE
- Page 1 PLEASE R E AD T H E I NS T RUC T I ON S CA R EF ULLY BE F OR E R I DING TFT DISPLAY OFF - ROAD STRONG TORQUE HYDRAULIC BRAKE NINGBO VSETT INTELLIGENT TECHNOLOGY CO., LTD...
-
Page 2: Table Of Contents
CONTENT SAFETY Safety Checklist Safety Precautions USING AND CARE YOUR E-BIKE Bike Specifcation Bike Assembly Guide 8-12 Assembly Instructions Battery LCD Display Settings Walk Mode and Pedal-Assist Set Interface Riding Modes Riding Limitations Parking & Transport Carrying Loads & Cargo Safety and Care Instructions MAINTENANCE Battery Maintenance... -
Page 3: Safety Checklist
SAFETY CHECKLIST Safety Check Basic Steps • Test front and rear brakes for proper function. • Ensure brake pads are not overworn and are correctly positioned in relation to rims. Brakes • Make sure brake control cables are lubricated, correctly adjusted and display no obvious wear. •... - Page 4 • Ensure battery is charged before use. • Check for any visible damage to battery pack. • Lock battery securely to frame. • Keep the battery away from children and pets. • Keep the battery & charger away from water and open fire. •...
-
Page 5: Safety Precautions
SAFETY PRECAUTIONS The following safety notes provide additional information on the safe operation of your VSETT EAGLE and should be closely reviewed. Improper operation, or failure to confirm correct installation, compatibility, and maintenance of any component or accessory may result in serious injury or death. -
Page 6: Bike Specifcation
BIKE SPECIFICATION ADJUSTABLE KNOB SHOCK ABSORBER LED LIGHTS S-RIDE 7-SPEED SHIFT SYSTEM HIGHLIGHT BRAKE LIGHT ADJUSTABLE PNEUMATIC SHOCK LIQUID SHOCK ABSORBER 48V 20AH BATTERY (80KM RANGE) ADJUSTABLE KNOB HYDRAULIC BRAKE 180MM DISC BRAKE 750W MOTOR (TOP SPEED 4KM/H) HYDRAULIC BRAKE 48V 22A CONTROLLER KENAD 20×40 INFLATABLE TIRE... - Page 7 MENU GEAR SHIFT BUTTON + SHIFT LEVER SHIFT LEVER THROTTLE ON/OFF GEAR SHIFT BUTTON -...
- Page 8 Model VSETT-Eagle E Bike Battery Samsung 21700 (5000mah) Motor Rear Wheel 48V 750W Brushless Motors Total Discharge 960Wh Specification 48V 20Ah Controller 48V 22A Weight 41.6KG (including the battery weight) Charging 11HR+ (USE a standard 2A Charger) Speed 40 KM/H Max Range About 80KM Max loading...
- Page 9 Adjustable oil suspension Suspension (spring 800 Pounds、Compression damping 90N、Minimum recovery damping 150N Maximum recovery damping 5300N) Chain KMC Chain Transmission S-Ride 7-speed shift system Free Wheel S-Ride 14-28T Drive mode Boost mode, throttle mode Spoke Crank 155mm aluminum alloy forging Both oil pressure disc brake / Front and rear brakes automatically power off function Brake Brake Disc 180MM...
-
Page 10: Bike Assembly Guide
BIKE ASSEMBLY GUIDE • Preparation Checklist Bicycle Frame Front Tire Pedals ASSEMBLY INSTRUCTIONS 1. Loosen four screws of T Bar Block cover and remove the T Bar Block cover. - Page 11 2. Put the T Bar on the Main Tube, put the harness on both sides of the headlight. 3. Install the T Bar upright cover back on the Main Tube (do not screw it completely).
- Page 12 6. Ride on the bicycle and adjust the T Bar to the proper position, then tighten the screw. 7. Remove the front axle.
- Page 13 8.Put the front wheel into the gear of the front fork, and the brake disc is on the left side. 9. Pay attention to align the brake disc with the caliper. Disc brakes align with calipers, both located on the left side of the bike.
- Page 14 10. Insert the front wheel shaft back into the front fork hole after the front wheel is placed in the correct position. NOTICE: When inserting the front axle, press and hold the nut on the left to prevent it from being push out, and then use tools to tighten the front axle shaft.
-
Page 15: Battery
BATTERY ◆ Battery Remove Step 1, insert the key and unlock the battery. Step 2, turn the knob and pull the top of the battery sideways. Step 3, lift it up to remove the battery from the bike. ◆ Mobile Wireless Charging Function Put your phone on a circular suction cup and charge. -
Page 16: Lcd Display Settings
LCD DISPLAY SETTINGS TIME VOLTAGE LONG PRESS "+" TO TURN ON/OFF LIGHTING INDICATOR Press the menu SPEED MAX SPEED SINGLE MILEAGE TOTAL RIDING TIME TRIP DIST MAX SPEED TRIP TIME AVG SPEED AVG SPEED TOTAL MILEAGE RANGE WATT OUTPUT POWER MOTOR POWER BATTERY LEVEL... -
Page 17: Walk Mode And Pedal-Assist
Your bike in the pedal assist mode, you can adjust the setting according to your preference. VSETT EAGLE has five pedal assist settings - ranging from 1 to 5. NOTICE: 0 means no power, neither the auxiliary pedal nor the accelerator has power. -
Page 18: Set Interface
SET INTERFACE ◆ Press and hold the “M” within 10 seconds after booting to enter the user setting interface. Speed unit MPH or KM/H. 1-5 levels of brightness can be selected. Set Startup Password (If you need to turn off the password, change ON to OFF, press Exit and long press the menu to save the changed settings). -
Page 19: Riding Modes
◆ Pedal-only In this mode, the VSETT EAGLE will perform like a normal bike, as you’ll be riding without any assistance from the motor. This mode is especially useful if you run out of battery, or are looking for more intensive resistance training. -
Page 20: Riding Limitations
• In public places, help keep your VSETT EAGLE safe and secure from theft by always locking it up. • Make sure to not park, store or transport your VSETT EAGLE on a rack that is not designed for the size and weight of the bike. -
Page 21: Carrying Loads & Cargo
2. Ensure your loads are properly secured and periodically check that nothing has loosened. 3. Plan your route accordingly when cargo is loaded on the VSETT EAGLE , considering hill climbing ability, steering, and braking. Also account for moderately reduced range when carrying extra cargo weight (or an additional passenger). -
Page 22: Safety And Care Instructions
SAFETY AND CARE INSTRUCTIONS To ensure safe riding conditions and maximize e-bike longevity, you must follow the guidelines outlined below: • To clean the e-bike, wipe the frame with a damp cloth soaked in a mild, non-abrasive, non-corrosive detergent mixture. Wipe or spray all unpainted parts with anti-rust treatment after being used in coastal areas or areas with salty air or water. -
Page 23: Maintenance
3. The VSETT EAGLE can be safely ridden in light rain. However, riding through very heavy downpours or through flooded streets is not recommended, as the crank and/or motor can get wet, which may cause problems. -
Page 24: Brake Maintenance
◆ Brake Maintenance 1. Pad replacement: Pads should be replaced if they become contaminated or have less than 2.5mm thickness. (Metal plate & wear material) 2. Before riding and After riding Check the pads for wear or contamination. Check the hose for cracking, wear or deformation. Replace if necessary. Check if the brake system is operating correctly. -
Page 25: Limited Warranty
This limited warranty applies to the extent permitted by law and unless restricted or prohibited by law. Limited Warranty Details 1. Vsett warrants that VSETT EAGLE products (“Products” or “Product”), are free from defects in material and workmanship, according to the following terms and conditions: Electronic Accessories... - Page 26 What this Limited Warranty does not cover: 1. Products used for commercial purpose(s) including but not limited to leasing/hiring, use in competitions etc 2. Any logistical costs of returning the Product to Vsett or its authorised service centres for servicing or the cost of returning the Product to the customer after servicing. 3.
-
Page 27: Error Codes
Disclaimer: 1. The customer understands the risk of serious injury or death in the operation of such products and shall agree to take the necessary precautions and exercise good judgement to avoid hazards and dangerous situations which may result in serious injury or death. 2. - Page 28 NEW MODELS ARE COMING SOON Web:www. vsett.com Facebook:VSETT Instagram:vsett.escooters YouTube:VSETT E-mail:sales@vsett-scooter.com USER MANUAL USER MANUAL NINGBO VSETT INTELLIGENT TECHNOLOGY CO., LTD...