Zamel ROP-22 Quick Manual

ZAMEL Sp. z o.o.
43-200 Pszczyna, ul. Zielona 27
tel.: +48 32 210 46 65; fax: +48 32 210 80 04
e-mail: marketing@zamel.pl
www.zamel.com
2-CHANNEL
• compatible with a controller and EXTA LIFE system
RADIO
• 2 output channels (voltage outputs),
• two-way transmission – current output mode
FLUSH RECEIVER
ROP-22
• 2 programmable external inputs,
• connection possibility of monostable or bistable
• 4 operation modes in cooperation with transmitters
• possibility of remote software update
Radio flush receiver ROP-22 is
the final element of the EXTA
LIFE system, which allows for an
independent control of two devices RNK-24
/ 230 V AC circuits. It is especially
dedicated to control lighting fittings
equipped with incandescent and
halogen lamps, LEDs and CFL
lamps. Current mode of the device
controlled by ROP-22 is shown in a
mobile application. The above has
been achieved due to a two-way
communication between a receiver
and a controller.
230 V AC; IP20
Net weight: 0,04 kg
ZAMEL Sp. z o.o. declares that the device complies with principal
ETSI EN 300 220-1
requirements and other applicable rules of the 2014/53/UE Directive.
ETSI EN 300 220-2
Registered design © ZAMEL
Made in Poland
1471
The symbol means selective
collecting of electrical and
electronic equipment. It is forbidden
to put the used equipment together
with other waste.
ROP-22_gb.indd 2-3
SCAN
the technical
data
transmitters,
indication in the application,
switches,
- 2 operation modes in cooperation with a controller,
P-457/4
• easy installation
in Ø60 mm junction box
• cooperates with EXTA LIFE
system devices
• operation range: up to 300 m
in the open area
05.09.2017 07:43