2-channel radio flush receiver
ROP-03
Mounting in a Ø60
Mounting
junction box
indoor only
ROP-03 receiver is designed to carry out simple control functions in the low-voltage instal-
lations from 10 ÷ 14 V DC. In connection with EXTA FREE system transmitters it enables the
realisation of the switch on/switch off function, the monostable mode, the bistable and
time modes. The receiver is recommended for use with LED diode lighting.
Characteristic features:
• cooperation with wireless EXTA FREE system transmitters,
• independent control of up to two receivers in the following modes: switch on/switch off,
monostable, bistable, time,
• 2 relay potential free outputs (NO) with a maximum capacity of 5 A for 250 V AC,
• wide operation range (up to 230 m outdoors),
• small dimensions - suitable for mounting in a typical Ø60 junction box,
• low power consumption in the standby mode (0.15 W) - the receiver is used to a continu-
ous operation.
PL 43-200 Pszczyna, ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
10÷14 V DC / 0,7 W; IP20
weight: 36 g
CET Lighting Sp. z o.o. declares that the equipment complies with the principal requirements
and other applicable rules of the RTTE Directive.
The symbol means selective collecting of electrical and electronic equipment.
It is forbidden to put the used equipment together with other waste.
Declaration of Conformity is on www.ledix.pl
SCAN
the technical
data
Co-operation
with EXTA FREE
transmitters
Zamel Sp. z o.o.
e-mail: ledix@ledix.pl, www.ledix.pl
ROP-03 ENG Ver. 01
2-channel radio
flush receiver
ROP-03
10 ÷ 14 V DC