Step 2: Charging The Battery Pack - Sony Handycam HDR-HC3 Operating Manual

Step 2: Charging the battery pack

You can charge the "InfoLITHIUM"
battery pack (P series) (p. 116) after
attaching it to your camcorder.
• You cannot use the battery pack NP-FP30 with
your camcorder (confirm the battery model on
the back of the battery pack). If you attach it
forcibly to your camcorder, the battery pack
may be damaged or cannot be detached, and it
may cause a malfunction of your camcorder.
POWER switch
DC plug
To the wall outlet
Power cord
• You can operate your camcorder connected to a
power source such as a wall outlet as shown in
the illustration. The battery pack will not lose its
charge in this case.
DC IN
jack
Jack cover
AC Adaptor
1
Attach the battery pack to your
camcorder.
1 Slide the BATT (battery release) lever
and remove the battery terminal cover.
2 Attach the battery pack by sliding it in
the direction of the arrow until it clicks.
BATT (battery
release) lever
15
Continued ,