Sony Handycam HDR-HC3 Operating Manual page 85

To USB jack
To USB jack
• Do not connect your camcorder to the computer
at this point.
• The computer may not recognize the camcorder
if you connect them with the USB cable before
turning on your camcorder.
• Refer to page 87 for the recommended
connection.
1
Turn on the computer.
Close down all applications running on
the computer.
For Windows 2000/Windows XP
Log on as an Administrator.
2
Insert a "Memory Stick Duo" into
your camcorder.
3
Prepare the power source for
your camcorder.
Use the supplied AC Adaptor as the
power source (p. 15).
USB cable
(supplied)
4
Slide the POWER switch to turn
on the PLAY/EDIT lamp.
5
Connect the USB cable to the
(USB) jack on your camcorder
and the USB jack on your
computer.
[USB SELECT] appears on the LCD
screen of your camcorder.
6
Touch [ Memory Stick].
It may take some time for the computer
to recognize the camcorder when you
connect the USB cable for the first time.
• You can also select [
from [USB SELECT] of
(PICT.APPLI).
• During the Easy Handycam operation, you
can set by connecting the USB cable.
Copying the pictures
For Windows users
Double-click the [Removable Disk] icon
displayed in [My Computer]. Then, drag
and drop a picture in the folder onto the
hard disk drive of your computer.
Memory Stick]
85
Continued ,