Getting Started; Step 1: Charging The Battery Pack - Sony Handycam HDR-TG1 Operating Manual

Getting Started

Step 1: Charging the battery pack

POWER button
DC IN jack
You can charge the "InfoLITHIUM"
battery pack NP-FH50 after attaching
it to your camcorder.
b Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than NP-FH50 to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
3
Make sure that the LCD panel is
closed.
US
8
QUICK ON
lamp
/CHG lamp
AC Adaptor
DC plug
Power cord
(Mains lead)
To the wall outlet
(wall socket)
4
Insert the battery.
1 Open the battery/Memory Stick Duo
cover.
2 Insert the battery pack all the way in
until it clicks.
3 Close the battery/Memory Stick Duo
cover.
5
Place the camcorder on the
Handycam Station as shown
above, and insert it into the
Handycam Station securely, all
the way to the bottom.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
Battery pack