Metering Unit - Stihl SR 5600 Instruction Manual

Metering Unit

Stop Cock
1
Stock cock (1) at right angle to
N
control handle = closed
Stock cock (1) parallel to control
N
handle = open
Adjust the discharge rate with the
N
metering knob – not the stop cock.
SR 5600
Metering Knob
2
4
3
The discharge rate can be infinitely
N
varied by turning the metering
knob (2) on the nozzle (3).
Position 1 = minimum flow rate
Position 6 = maximum flow rate
The numbers on the metering knob must
be lined up with the lug (4) under the
knob.
Discharge Rate
The discharge rate (l/min) depends on
the metering knob setting and the spray
tube angle.
Discharge rate (l/min) without pressure
pump
Spray tube angle
Knob setting - 30°
1 0,28 0,28
2 0,92 0,85
3 2,22 1,73
4 2,96 2,36
5 3,41 2,7
6 3,62 2,91
Discharge rate (l/min) without pressure
pump, with ULV nozzle
Spray tube angle
Knob setting - 30°
0,5 0,1 0,09
0,65 0,12 0,12
0,8 0,16 0,15
Discharge rate (l/min) with pressure
pump (special accessory)
Spray tube angle
Knob setting - 30°
1,0 0,75 0,74
1,6 2,12 2,02
2,0 3,15 3,09
Discharge rate (l/min) with pressure
pump (special accessory) and ULV
nozzle
Spray tube angle
Knob setting - 30°
0,5 0,19 0,18
0,65 0,29 0,28
0,8 0,48 0,47
English
0° + 30°
0,2
0,79
1,33
1,75
2,03
2,19
0° + 30°
0,08
0,1
0,14
0° + 30°
0,74
1,98
3,06
0° + 30°
0,18
0,27
0,47
17