Advertisement
Zebra : Assembly Instructions
Assemble C10 and C11, and attach to the body.
Next, assemble C12.
Assemble C13, and attach it to C10.
Assemble C14, C15 and C16,
and attach them together in order. Next, attach them to C13.
When assembling the legs,
put glue on the edges
of the back of the parts too.
When
assembling the legs,put glue
on the edges of the back of the parts too.
Align the seams on each part.
Use a pencil
to hold down
the glue tabs inside.
Align the seams
on each part.
In the same way, assemble C17, and C18, C19 and C20,
and attach them to the body.
Assemble C21, C22, C23 and C24. Place the hooves
on the ground, without adding any glue. Attach the body
to the hooves, taking care to balance it so that it is straight.
Align the seams on each part.
Align the seams on each part.
Assemble C25, and attach to the body,
and your zebra is complete!
Page
Katsuyuki Shiga ( PinoArt )
Canon Inc.
Put glue on the edges
of the back of the parts.
Advertisement
