Canon CREATIVE PARK Zebra Assembly Instructions page 3

Zebra : Assembly Instructions
Assemble the body
Use pattern: Page4/Page5.
Assemble B1 and B2, and attach it to the neck.
Attach B3 and B4 together, and attach B1, B2.
Assemble the legs and back
Use pattern: Page6 to Page8.
Assemble parts C1/C2/C3/C4, and attach them in order.
When assembling
the legs, put glue
on the edges
of the back
of the parts too.
Use a pencil
to hold down
the glue tabs
Align the seams
inside.
on each part.
Align the seams
on each part.
Assemble parts C5/C6/C7/C8 in the same way.
Attach these legs to the shoulders.
Make sure
all the glue tabs
are tucked inside.
Assemble C9 to B3.
Page
Katsuyuki Shiga ( PinoArt )
Canon Inc.
Align the seams
on each part.
Attach the right foreleg in the same way.