Led Light - ZyXEL Communications Multy X WSQ50 User Manual

1.6 L ED L ig ht
Look at the LED on the top panel to determine the status of the Multy Device.
Multy Device LED Light
Fig ure 1
The following are the LED descriptions for your Multy Device.
Table 1 Multy Device LED Descriptions
C O L O R
White
Blue
Red
Chapter 1 Get to Know Your Multy WiFi System
ST AT US DESC RIPT IO N
Off The Multy Device is not receiving power.
Blinking The Multy Device is booting up, undergoing firmware upgrade, or being
configured.
On The Multy Device is on and connected to the Internet.
Blinking Bluetooth is enabled on the Multy Device.
On The Multy Device in extender mode is connected to the root AP.
On The Multy Device in root AP mode failed to connect to the Internet, the Multy
Device in extender mode cannot connect to the root AP, or Bluetooth is not
working on the Multy Device.
Slow Blinking An error occurred during firmware update.
Fast Blinking The Multy Device is in the process of default restoring.
Multy WiFi System User's Guide
7