Descaling; Storage - Silvercrest SADH A1 Operation And Safety Notes

m
WARNING! Never immerse the
product in water or other liquids .
Never hold the product under running
water .
Do not use any corrosive or abrasive
¾
cleaning agents .
Clean the product with a damp cloth .
¾
If any stubborn stains remain, place
a few drops of mild detergent on the
damp cloth and clean it again .
Clean the dish 9 regularly by using a
¾
slightly moistened cotton bud .
˜ Descaling
Descale the product if visible deposits
occur or if the steam output is restricted .
Use a standard commercial liquid
¾
descaling agent .
Fill the water tank 5 to the maximum
¾
fill level 4 with descaler .
Wait according to the instructions of
¾
the descaler .
18 GB
Pour the dirt away . Clean the water
¾
tank 5 with a soft and slightly damp
cloth .
Rinse the diffusion cone 2 and the
¾
water tank cover 3 with running
water
Dry the diffusion cone 2 and water
¾
tank cover 3 before putting them on
the product .
˜ Storage
Store the product in the original
¾
packaging when it is not in use .
Store the product at a dry location out
¾
of the reach of children .