Switching Off The Product; Cleaning And Care; Descaling - Silvercrest SADH A1 Operation And Safety Notes

˜ Switching off the product
Switching off: Press
¾
Disconnect the power adaptor 6
¾
from the socket outlet .
Disconnect the cable of the power
¾
adaptor 6 from the plug socket 14 .
Remove the diffusion cone 2 and the
¾
water tank cover 3 .
Empty the product via the pouring
¾
spout 16 . Take note of the pouring
direction arrow 15 on the water tank
5 .
m
ATTENTION! To avoid damage,
do not discard the water through the
ventilation slot 8 .
˜ Cleaning and care
m
DANGER! Risk of electric
shock! Disconnect the power
adaptor 6 from the socket outlet
before cleaning the product .
Never touch the power adaptor with
moist or wet hands .
Always keep the power adaptor and
supply cord dry .
m
11 .
¾
¾
¾
˜ Descaling
Descale the product if visible deposits
occur or if the steam output is restricted .
¾
¾
¾
WARNING! Never immerse the
product in water or other liquids .
Never hold the product under running
water .
Do not use any corrosive or abrasive
cleaning agents .
Clean the product with a damp cloth .
If any stubborn stains remain, place
a few drops of mild detergent on the
damp cloth and clean it again .
Clean the dish 9 regularly by using a
slightly moistened cotton bud .
Use a standard commercial liquid
descaling agent .
Fill the water tank 5 to the maximum
fill level 4 with descaler .
Wait according to the instructions of
the descaler .
GB/IE 31