Advertisement
6. Height Adjustment
U U N B. Before attempting to adjust the height of your commode, always ensure that the commode
pail is removed.
To adjust the height of your Linton, carefully lay the commode on its side. Remove all the e-clips and
adjust all four legs equally to the desired height.
Re-insert the e-clips ensuring that each one passes through the frame and the correct hole in the
extension leg.
Return the commode to the upright position and make sure that all wheels are sitting evenly on the
floor.
U U
Never extend the legs in a manner that the commode is slanting this will compromise the safety of
the user.
7. Commode Bucket
To remove the commode bucket, simply slide the bucket out from the chrome runners at the rear of the
commode. Cover the top of the bucket to avoid splashing, carefully dispose of the contents into a
proper sluice or WC. Never use an open drain, sink or basin. This could cause a serious health risk.
Clean out the residue with a suitable disinfectant and refit to the commode after use.
8. Reissue
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety. This includes:
PAT test for electrical items
•
Tightness of all nuts/bolts/castors and other screw-in/bolt-in/push-in components
•
Also check all upholstery for security, splits, etc.
•
If in any doubt, please do not issue or use, but immediately contact your supplier for service support.
8. Maintenance
Please make a safety check of the product at regular intervals or if you have any concerns.
Advertisement
