Jumper Setting - FlyTech POS485 User Manual

6-4-3. Jumper Setting

Cash Drawer Power Setting
Function
COMBO Speaker Setting
Function
Enagle
1
Jumper open
2
COM1/COM2/COM3 Power Setting
COM1, COM2 and COM3 can be set to provide power to your serial device.
1. Power on the system, and press the <DEL> key when the system is booting up to
enter the BIOS Setup utility.
2. Select the Advanced tab.
3. Select
the available options.
4. To enable the power, select COM1 ,COM2 or COM3 Power setting and press
<Enter>. Select Power and press <Enter>. Save the change by pressing F10.
1
2
JP1
1 3
2 4
1 3
2 4
JP2
1
2
1
2
Ports and press <Enter> to go to display
35