System Assembly & Disassembly; Stand Disassembly; Power Adapter Replacement - FlyTech POS485 User Manual

3.
System Assembly & Disassembly
3-1.

Stand Disassembly

1. Loosen the thumb screw (x1) and
slide the stand towards the IO panel
to release it from the system.
2. Reverse the steps above to attach
stand to the system.
3-2.

Power Adapter Replacement

Power adapter is secured to the system stand by a holding bracket and screws.
To attach power adapter, please follow the steps below.
1. Route the cable as shown in the
picture.
2. Connect the cable to the DC-IN port
on system IO panel.
6