Cd/Mp3/Wma/Ipod Mode; Basic Information; Changing To Cd/Mp3/Wma/Ipod Mode - Blaupunkt BARCELONA 230 Operating And Installation Instructions

CD/MP3/WMA/iPod mode

CD/MP3/WMA/iPod mode

Basic information

CD/MP3/WMA mode
Barcelona 230:
This car sound system can be used to play back au-
dio CDs (CDDA) and CD-R/RWs with audio, MP3 or
carriers and SD(HC)/MMC memory cards.
Brisbane 230:
This car sound system can be used to play MP3 or
les on USB data carriers and SD(HC)/MMC
memory cards.
Notes:
• To ensure proper functioning, use only CDs
with the Compact-Disc logo.
function of copy-protected CDs and all
CD blanks, USB data carriers and memory
cards available on the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories:
sion ".mp3" or ".wma" (the use of more
characters reduces the number of tracks
and folders that the car sound system can
recognise)
– No umlauts or special characters
• CD formats: CD-R/RW, Ø: 12 cm
• CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
le system: Mass storage device /
FAT16/32
le system: FAT16/32
les
les only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
• MP3 ID3 tags: Version 1 and 2
10
02_Barcelona_Brisbane_World_gb.indd 10
les on USB data
awless
le exten-
les:
les
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
to 20,000 entries depending on the data struc-
ture
iPod mode
You can connect numerous iPod and iPhone
models to the car sound system via the USB port
and control the audio playback from the car sound
system.
Note:
A list of compatible iPod and iPhone models
is located at the end of these instructions.
function of other iPod and iPhone models.
Use a suitable adapter cable to connect your iPod
or iPhone with the USB port of the car sound
system.
Changing to CD/MP3/WMA/iPod
mode
Press the SRC button
?
desired audio source is displayed:
• "CD" (Barcelona 230 only): Inserted CD
• "SD(HC)": Inserted memory card
• "USB": Connected USB data carrier
• "IPOD" / "IPHONE": Connected iPod / iPhone
• "AUX": Connected external audio source
Notes:
• The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device is connected.
• A connected iPod is initially selected un-
der "USB" and as soon as the iPod has been
recognised under "IPOD".
the data of a connected device or data car-
rier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design of
les:
les and directories: Up
awless
repeatedly until the
rst has to read
20.06.14 09:43