Troubleshooting; Maintenance And Sterilization - Coxo C-SMART-I+ User Manual

Charge
LCD displays the current battery power, the number of lattice shows
more, and the power is fuller. If there is no electricity, the lattice will
flicker, which means the battery power is about to run out, at this status
the beeper will ring per 3S, and the unit will shut down after 60S.
To fully charge the battery, you should connect the unit to adaptor at least
for 4 hours or more (The new battery requires at least 8 hours or more),
the sign will be running during the battery charging.
Notice: when the instrument is connected to the adaptor, the unit will
power off automatically, and the beeper will beep for three times,
showing the connection is correct.
Automatic power off
The instrument will shut down automatically when it continues working
for 3minutes. In that case, all display and function will stop.
Notice: When power off, the LCD will show recharging sign when
charging.

Maintenance and sterilization

1. If not use the unit for long time, please open the battery cover and
remove the battery, keep the instrument clean and store it somewhere
dry and clean.
2. Parts like contra angle and stainless electrode, which have direct
contact with the patient, should be disinfected by autoclave each time
after using. The contra angle holder and the electrode wire can be
autoclavable at 135°C.
3.The crust of the instrument and the wire should be disinfected by the
ethanol.
13

Troubleshooting

If the equipment is not normal work, before call our after-sales center,
please check the table below.
14