KickAss KACHG1222 User Manual page 14

STEP
Press and hold the Mode button for more than 4 seconds. The charger will enter Lithium
4
Activation mode.
LITHIUM
BATTERY
In this mode, the output voltage will be a constant 13.9V supplying 22A. On the display
screen AUTO will be on and the Battery Icon on the left hand side will be blinking. The
charger will stay in Lithium Activation Mode for 10 minutes, after which time the charger will
have reactivated the BMS to allow normal charging of the battery.
NOTE: Lithium Activation Mode is not accessible while in AGM or STD charging modes.
NOTE: The charger can exit this mode prior to the 10 minute time limit, by pressing the Mode
button for 4 seconds again.
NOTE: Some batteries do have a voltage on the terminals in Under Voltage Protection
mode, in which case this Activation Mode will not be required.
12
240V AC