5.2 Standard Operation
To connect the charger to the battery and begin the charging process, please ensure the
following procedure is followed.
STEP
Ensure that the 240V AC Mains is disconnected.
1
BATTERY
STEP
When connecting using the alligator clamps, ensure it is connected via the anderson
2A
connector to the charger. Then Connect the POSTIVE + (Red) clamp of the charger to
the POSITIVE + terminal on the battery post and the NEGATIVE - (black) clamp of the
charger to the NEGATIVE - terminal on the battery post.
BATTERY
STEP
When connecting directly by the anderson connector, plug it into the mating anderson
2B
connector charge port of a battery box or other device with anderson charging input
ensuring correct polarity.
BATTERY BOX
8