Table of Contents
Advertisement
►
1. Contact element 2. Nose adapter 3. Protrusion
4. Gap
Air duster
►
1. Air duster button
NOTICE:
After using the air duster, the driving force
of the tool will temporarily decline. Wait until the air
pressure recovers in this case.
NOTICE:
Perform a test blow if you use the air duster
immediately after the oil was applied. The oil may be
sprayed with the air.
ASSEMBLY
CAUTION:
Before carrying out any work on
the tool, always release the trigger and
disconnect the air hose from the tool.
CAUTION:
Load the same type, size and
uniform length of nails when loading nails in the
magazine.
Loading nailer
CAUTION:
Be careful not to injure yourself
with the fasteners when loading and unloading.
NOTICE:
Select nails suitable for your work.
NOTICE:
Set the coil support plate according to
the nail size to be used. If the tool is operated with
the coil support plate set to the wrong step, poor nail
feed or malfunction of the tool may result.
1.
Depress the latch lever and open the door
and the magazine cap.
7 ENGLISH
Advertisement
Table of Contents
