Panasonic SA-VKX95EE Service Manual page 18

6.3.3. Doctor Mode Table 3
Item
Mode Name
Bluetooth Bluetooth module will need some
Version Check time to power up and read the
version display.
Meanwhile [_BT_ll----_] will show
before the ver. numbers appear.
2s display count should start after
flash version number appear.
Bluetooth Devices Bluetooth Address Check
Address
Confirmation
Region Check Checking for model no and
Region
Description
v = flash version (0~7),
w = flash sub version (0~F),
x = control version (0~F),
yyy = EEPROM version (0~255),
zz = EEPROM sub version (0~99),
XX is a 6 byte BD address.
If there is any error, it will show ERROR on
Left side FL display.
AD value of region pin is check and display will
show [REG YYY] based on region table.
YYY = 001 ~ 010 based on region table as below.
FL Display
Region Model Series
1 VKX95 GA
2 VKX95 GS
3 VKX95 EE
6 VKX25 GA
7 VKX25 GS
8 VKX25 EE
11 VKX65 GA
12 VKX65 GS
13 VKX65 EE
18
Key Operation
Front Key
1. Go to Bluetooth selector and
then enter Doctor Mode.
( 2 sec)
2. Press [10] [2]
display will show.
( 2 sec)
In Doctor Mode:
1. Press [10] [2]
display will show.
In Doctor Mode:
1. Press [10] [1]
on the remote control.
[4] and
[8] and
[6] button