Sending An Sms Message With Attached Coefficient - Siemens SIMATIC S7-300 Manual
Sending and receiving sms messages via serial cps and the md720-3 gprs/gsm modem
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Reference manual (574 pages) ,
- Installation and operating manual (356 pages)
Table of Contents
Advertisement
6.1.2
Sending an SMS message with attached coefficient
The table below lists instructions for sending an SMS message with an attached
coefficient.
Table 6-2
No.
1.
Generate a new SMS message as described in steps 4, 5 of table 6.1.
In MW 14 "Value", enter any coefficient as an integer value and enable the val-
2.
ue.
3.
Send the new SMS message as described in steps 6, 7 of table 6.1.
Note
If you want to send an SMS message without an attached coefficient, enter the
value "0" in MW14 "Value". If you do not enter a value, the previous value will be
applied.
Sending and Receiving SMS Messages with MD720-3
V 2.1, ID Number: 25545680
6.1 Sending an SMS message (scenario 1/scenario 2)
Procedure
6 Operation of the Application
45
Advertisement
Table of Contents
