Downloading The Step 7 Project - Siemens SIMATIC S7-300 Manual

5.2

Downloading the STEP 7 project

Variant for the CP 340/ CP 341/ CP 441-2 communications modules
Table 5-7
No.
1. In the SIMATIC MANAGER, set the PC inter-
face to MPI.
"Options > Set PC/PG Interface..."
Use the Properties button to view the MPI
2.
properties.
If necessary, change your MPI properties as
shown in the screen shot.
Close all dialog boxes with OK.
If you are using an S7-300 station, select the
3.
CP_340 or CP_341 S7 station and download
the entire project to your CPU.
"PLC > Download"
Sending and Receiving SMS Messages with MD720-3
V 2.1, ID Number: 25545680
Action
5 Commissioning of the Application
5.2 Downloading the STEP 7 project
Remark
41