Trane NEW STYLUS MCX Series Owner's Manual page 9

Name and function of buttons
1. Infrared Signal Receiver (op-
tional)
Receives the signal from handheld
remote control and transmits the signal
to indoor unit.
2. POWER Button
Press this button to start unit operation.
Press this button again to stop unit
operation.
3. Temperature Setting Button
TEMP : Press this button to increase
the set temperature.
TEMP : Press this button to decrease
the set temperature.
4. MENU Button
Press this button to select modes or
functions in the menu.
5. MODE Button
Press this button to select system
operation mode. In cooling only system,
a mode is selected in sequence as FAN,
COOL, DRY, and back to FAN. In
cooling and heating system, a mode is
selected in sequence as FAN, COOL,
DRY, HEAT, AUTO, and back to FAN.
6. FAN SPEED Button
Press this button to select fan speed.
Indicators on Digital Wired
Control
SVU-MCXA_GB-EX (R410A)
SVU-MCXA_GB-EX (R410A).indd
Digital Wired Control
1. CLOCK
Displays present time.
2. ON TIMER
Display ON TIMER when ON TIMER
is set.
3. OFF TIMER
Display OFF TIMER when OFF TIMER
is set.
4. SLEEP Mode
Display sleep symbol after activating
SLEEP mode.
5. Room & Set Temperature
- Displays the room temperature.
When FAN or TURBO mode is
selected, the room temperature will
be disappeared until FAN or TURBO
mode is cancelled or complete.
- Displays the set temperature (15ºC
to 30ºC) when either
is pressed.
6. FAN Speed
Display the selected fan speed level:
auto, low, medium, or high.
7. Operation Mode
Displays the current operation mode:
FAN, COOL, or DRY in cooling only
system.
8. ECONO Mode
Displays "ECONO" when ECONO
mode is activated.
9. TURBO Mode
Displays "TURBO" when TURBO mode
is activated.
10. SWEEP Function
Displays sweep symbol when sweep
motor is activated.
11. Compressor Status Indicator
Displays compressor status.
Operation Mode
FAN Mode
- Press Mode button to select the
operation mode.
- will be shown on the display when
FAN mode is selected.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
A
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
9
Note:
• In FAN mode, the LCD display will not
show set temperature and cannot
adjust set temperature, SLEEP,
ECONO, and TURBO mode.
COOL Mode
- Press Mode button to select the
operation mode.
- will be shown on the display when
COOL mode is selected.
- Press either or
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
or button
A
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
DRY Mode
- Press Mode button to select the
operation mode.
- will be shown on the display when
DRY mode is selected.
- Press either or
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
A
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
Note:
• In DRY mode, if the compressor stops
working, fan motor and SWEEP
function will be stopped; fan motor and
SWEEP function will operate when
compressor operates.
• ECONO mode can not be activated
during DRY mode operation.
21/11/2017, 11:27 AM
button to set the
button to set the
9