Advertisement
How to Assemble the
AquaBasin
™
Ceramic Bubbler
Plumbing Assembly
Installing a Ceramic Bubbler
™
1) The Small AquaBasin
Connect the Ceramic Bubbler Plumbing Assembly, as shown in the Figure 11 (Item
#98202 sold separately) and place the pump and plumbing inside the AquaBasin
2) Place the ceramic bubbler on the AquaBasin
bottom of the ceramic bubbler. (Fig. 12)
3) Insert PVC stand pipe into MPT x Slip. (Fig. 13) The stand pipe prevents water from
completely draining the bubbler and will assist in creating the rippling effect at the top
of the bubbler. Note: You can trim the stand pipe to fit different size ceramic bubbling
urns and/or to adjust desired effect.
4) Now that everything is in place, you can now finish covering the top of the AquaBasin
with gravel.
90° Barbed
Elbow
is designed with one removable grate for easy pump access.
™
. Attach the plumbing from the pump to the
Fig. 12
PVC Extension
Tube
MPT x Slip
Fitting
Bulkhead
MPT x Barb
Fitting
Tubing
Fig. 11
™
.
™
Fig. 13
Advertisement
