Advertisement
Small
AquaBasin
Installation Instructions
Instructions
1) Set the AquaBasin
trace out the area that will be excavated. (Fig. 1)
2) Using the marked area as your guide, dig your
hole for the AquaBasin
than the basin. Make sure to tamp the base of the
excavated hole to prevent any unnecessary settling
that may occur. (Fig. 2 & 3)
3) Place the AquaBasin
to make sure that it is level side-to-side and
front-to-back. (Fig. 4)
4) Once the AquaBasin
with dirt. (Fig. 5)
™
*Large AquaBasin
2
™
in the desired location and
™
approximately 1" deeper
™
in the hole and use a level
™
is level, start to backfill
is shown
Fig. 3
™
Fig. 4
Fig. 1
Fig. 2
Fig. 5
Advertisement
