Bluetooth; Pairing Bluetooth Devices - Polaroid PLSB311 User Manual

Bluetooth

You can listen to tracks from a media device if
connected to the unit via Bluetooth® wireless
technology.
Pairing Bluetooth
The first time you use your Bluetooth
the soundbar, you will need to pair them with one
another.
Activate Bluetooth on your compatible device, and
set it to search for compatible devices.
Select the name: 'Polaroid PLSB311' from the list of
found devices.
Note: Only one playback unit can be connected to
the soundbar If the soundbar is already connected to
another playback unit, the soundbar will not appear in
the Bluetooth selection list. To disconnect the existing
paired device, press and hold the
remote for 3 seconds.
If your device asks for a passkey (depending on the
device manufacturers, model, and software version),
then enter digits "0000" and press OK.
®
Devices
®
device with
®
button on the
The operational range between this player and
a Bluetooth device is approximately 10 metres
®
(without any object between the Bluetooth
enabled device and the unit). Any obstacle
between the devices can reduce the operational
range.
Before you connect a Bluetooth
to this unit, ensure you know the device's
capabilities. Compatibility with all Bluetooth
devices is not guaranteed.
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
If a mobile phone on which you are playing music
receives a call, the music will be interrupted.
The phone call audio however is not played via
the speaker. Once you end the call, the devices
are connected to each other again and playback
resumes.
Your device will also be disconnected when your
device is moved beyond the operational range. If
you want to reconnect your device, place it within
the operational range.
If the connection is lost, follow the instructions
(left) to pair your device to the player again.
enabled device
®
®
®
BLUETOOTH | 21