Polaroid PLSB311 User Manual page 19

Using the Optical input
• Use the supplied optical cable to connect the optical output on the audio source and the
optical input on the soundbar.
• Press the Power button on the soundbar or remote control to switch on the unit.
• Press the Mode button on the remote control to switch to optical mode or select the Source
button on the main unit.
• Using the controls on your connected device, make sure the audio settings are set to PCM
or optical audio. Audio from the connected audio source will now be played through the
soundbar.
Using the Line In input
• Use the supplied 3.5mm AUX cable to connect the Line In output on the audio source and the
Line In input on the soundbar.
• Press the Power button on the soundbar or remote control to switch on the unit.
• Press the Mode button on the soundbar or remote control to switch to Line In mode.
• Audio played through the connected device now be heard through the speakers.
OPERATION | 19