Setting Up Your Device; Step One: Insert Your Cingular Sim Card; Step Two: Insert The Battery - Blackberry Cingular 8700c Getting Started Manual

Setting up your device

Step one: Insert your Cingular SIM
card
Your SIM card contains important information
about your wireless service. Your SIM card might
be inserted already if you did not obtain your
BlackBerry device from a retail store.
Warning: Turn off your device before you insert or
remove the SIM card. Do not scratch, bend, or
expose the SIM card to static electricity or wet
conditions.
1. Press the battery cover release button.
2. Slide off the battery cover.
3. If the battery is inserted, remove it.
4. Hold the SIM card with the metal contacts
facing down so that the notched corner of
the card is on the bottom right.
4
5. Slide the SIM card into the holder so that it
lies flat below the metal guide.
6. Continue to slide the SIM card into the
holder until it stops. One end of the SIM card
should be slightly hidden below the plastic
casing on your device.
Note: To remove the SIM card, press down lightly
on the SIM card and slide it out of the holder.

Step two: Insert the battery

Warning: Use only the battery that Research In
Motion® specifies for use with your BlackBerry
device. Using any other battery might invalidate
any warranty provided with your device and might
present a risk of fire or explosion. See the
BlackBerry Safety and Product Information
booklet that accompanied your device for more
information about using the battery safely.
1. Insert the battery so that the connectors on
the battery align with the connectors in the
battery compartment on your device.