Remove rubbish from
areas
When you want to wash the rolling brush with water
Rotate the brush cover so that
"
" may arrive at "
"
Brush cover
Knob
Press on the shutter
while holding the
knob to open the
brush cover
Reinstall
Press the brush down
Put on the belt
Request
Request
When washed with water...
Please do not use substances such as detergent, bleach, thinner or alcohol (To avoid cracks and colour change)
Floor nozzle
Floor nozzle
(Bottom)
Take off the belt
Press on the shutter
while lifting the
rolling brush
Make "
" arrive at "
"
Press on the shutter and snap the hole in the brush cover into the claw
• Remove any water and dry completely (To avoid causing strong odours or clogs)
• Please do not use blow dryer or similar device to dry it (To avoid deformation and
malfunction)
[ Except rolling brush ]
Cut with scissors along the gaps between
the brushes to remove tangled rubbish
Remove rubbish from
Pull out
Wash the rolling brush with water
After washing, please fully dry
After washing, please fully dry
Assemble
Non-
washable
areas.
EN13