Bluetooth Qualification Information - u-blox ODIN-W2 Series Datasheet

204-510009
この製品は屋内においてのみ使用可能です
Figure 7: Giteki mark, R and the ODIN-W2 MIC certification number. The "Indoor use only" information translated into
Japanese below is mandatory if the product is operating in the 5.2/5.3 GHz band.
The recommended size of the Giteki mark is Ø5.0 mm but the minimum size is Ø3.0 mm.
The end product holder should also include a copy of the Japan Radio Certificate to the end product technical
documentation. See the Contact information in the end of this document for a copy of the Radio Certificate.
7.6

Bluetooth qualification information

The ODIN-W2 series modules are in Advance Information status as mentioned in Document status
section. Hence, the information in this section is not fully valid and completed yet but will be
when the module is fully tested and approved in the Production Information stage as mentioned
in the Document status section on page 2.
The ODIN-W2 series modules have been qualified according to the Bluetooth 4.0 specification.
For information how to list and declare your product see the ODIN-W2 series System Integration Manual
[2][2].
UBX-14039949 - R05 Advance Information
ODIN-W2 series - Data Sheet
Qualification and approvals
Page 29 of 36