R E P L A C I N G T H E B U L B
N OT E :
The lights must be replaced by a qualified person.
1. Switch off and unplug the extractor
2. Remove the aluminium grease filter
3. Remove the LED light by squeezing the metal clips.
4. Remove the clip cover by removing the lid (see image a.)
5. Unclip the light fixing (b.) and remove.
6. Replace the light with the same rated LED fitting by following these instructions in reverse.
etal clips
(see
fitting
Solution
ammed
Switch off the unit and contact
Caple Service. To be repaired by
aged
qualified service personnel only.
Replace the fuse
Plug in to the power supply
loose
again
18
Instruction manual CCH
b
.
Please keep this instruction manual for future reference
.
a