Rehau RAUTOOL A-light Operating Instructions Manual page 25

RAUTOOL A-LIGHT
OPERATING THE CLAMPING TOOL
When fitting clamping jaws, always push long clamping jaw on the
tool cylinder first, followed by short clamping jaw.
Fix clamping jaws using ball-headed pins!
Caution!
Insert ball-headed pins completely, ensuring that double clamping
jaws (e.g. dim. 25) are aligned identically.
The clamping jaws are brought into the correct position by turning the
tool cylinder.
For insertion of the battery, place battery completely into the grab
handle until the battery is automatically arrested.
25