Installation - Alpine CDE-172BT Owner's Manual

Installing the microphone (CDE-172BT/
UTE-73BT only)
To capture your voice during handsfree calling,
you need to install the microphone
Clip (not supplied)
Cautions
• It is extremely dangerous if the cord becomes
wound around the steering column or
gearshift. Be sure to keep it and other parts
from interfering with your driving operations.
• If airbags or any other shock-absorbing
equipment is in your car, contact the store
where you purchased this unit, or the car
dealer, before installation.
Note
Before attaching the double-sided tape
surface of the dashboard with a dry cloth.

Installation

Removing the protection collar and the
.
bracket
Before installing the unit, remove the protection
collar
1
Pinch both edges of the protection collar
2
Insert both release keys
click, and pull down the bracket
pull up the unit to separate.
Mounting the unit in the dashboard
• Before installing, make sure the catches on
, clean the
both sides of the bracket
mm (3/32 in).
• For Japanese cars, see"Mounting the unit in a
Japanese car" (page 42).
1
Position the bracket
dashboard, then bend the claws outward
for a tight fit.
and the bracket from the unit.
, then pull it out.
Face the hook inwards.
inside the
until they
, then
are bent inwards 2
41
-EN