Table of Contents
Advertisement
Quick Links
Operator's Manual – Spider CROSS LINER
REMOTE CONTROLLED MOWER SPIDER
OPERATOR´S MANUAL
SPIDER CROSS LINER and SPIDER CROSS LINER LITE
Revision 4 _ 2021
S.N. 185 -
Product´s production number
Engine type
Engine´s production number
DVOŘÁK – svahové sekačky s.r.o.
Pohled 277, 582 21 Pohled, Czech Republic
+420 564 036 099, info@spider-cz.com,
www.spidermower.com
Advertisement
Table of Contents
Troubleshooting
Related Manuals for SPIDER CROSS LINER
Summary of Contents for SPIDER CROSS LINER
- Page 1 Operator’s Manual – Spider CROSS LINER REMOTE CONTROLLED MOWER SPIDER OPERATOR´S MANUAL SPIDER CROSS LINER and SPIDER CROSS LINER LITE Revision 4 _ 2021 S.N. 185 - Product´s production number Engine type Engine´s production number DVOŘÁK – svahové sekačky s.r.o.
- Page 2 Operator’s Manual – Spider CROSS LINER Notes:...
-
Page 3: Table Of Contents
Operator’s Manual – Spider CROSS LINER TABLE OF CONTENT INTRODUCTION INSTRUCTIONS EC/EU DECLARATION OF CONFORMITY SAFETY SAFETY WARNINGS ........................8 SAFETY INSTRUCTIONS........................ 9 SAFETY LABELS ........................... 11 ABOUT THE PRODUCT MAIN COMPONENT LOCATION ....................14 USE OF THE MOWER ........................15 MAXIMUM SLOPE INCLINE ...................... - Page 4 Operator’s Manual – Spider CROSS LINER TECHNICAL DATA FLUIDS, LUBRICANTS AND FILLING VOLUMES ................ 57 TECHNICAL DATA ......................... 57 10 TROUBLESHOOTING 10.1 MOWER TROUBLESHOOTING ....................59 10.2 WINCH TROUBLESHOOTING ...................... 60 10.3 REMOTE CONTROL TROUBLESHOOTING ................60 11 WARRANTY CONDITIONS...
-
Page 5: Introduction
Operator’s Manual – Spider CROSS LINER INTRODUCTION OPERATING INSTRUCTIONS This manual is an integral part of the mower, keep it clean and in good condition. In case of loss or damage, replace it immediately. Always keep it available with the machine and, if handed over to another owner/operator, please provide the manual as well. -
Page 6: Instructions
Operator’s Manual – Spider CROSS LINER 1 INSTRUCTIONS SERIAL NUMBER In this manual you will find information about the SPIDER CROSS LINER and SPIDER CROSS LINER LITE Applies to all models starting with serial number 185. MANUFACTURER’S ADDRESS DVOŘÁK – svahové sekačky, s.r.o.,... -
Page 7: Ec/Eu Declaration Of Conformity
Product (Machine) – Type: Mower SPIDER CROSS LINER Serial number: Description: SPIDER CROSS LINER is a remote-controlled mower designed for mowing and mulching grasslands on normal and sloping terrain. We declare that the machinery fulfils all the Directive 2006/42/ES, NV č. 176/2008 Sb. -
Page 8: Safety
If you do not understand the warning messages, ask your employer or SPIDER distributor / dealer for an explanation. Please be aware that security is not just a matter of responding to a given alert. You must keep in mind the possible hazards and try to avoid them for the duration of the work on or with the product. -
Page 9: Safety Instructions
Operator’s Manual – Spider CROSS LINER 3.2 SAFETY INSTRUCTIONS Do not enter or reach under the machine if it is lifted and not sufficiently supported. The machine should be supported on places marked by the symbol of a lifting jack. - Page 10 Operator’s Manual – Spider CROSS LINER While operating the mower avoid obstacles, do not drive over higher obstacles (such as stones, stumps, brick), near precipices, on unstable soil or in places where the mower could fall down or flip over.
-
Page 11: Safety Labels
Operator’s Manual – Spider CROSS LINER The working position should be far enough (maximum 50 m / 165 ft.) to prevent the operator from getting hit by objects that may be accidentally thrown by the mower. Do not operate the mower if you cannot see it (behind terrain obstacles, corners of buildings, hidden in grass etc.) ... - Page 12 Operator’s Manual – Spider CROSS LINER SAFETY LABEL IDENTIFICATION Description Label Height of cut label Fuel label Safe operating distance Danger of being hit by flying objects No manipulation with moving parts until the whole system is stopped Warning, do not use your hands as...
- Page 13 Operator’s Manual – Spider CROSS LINER Correct winding direction of the rope Wrong direction for rope winding When winding / unwinding, keep the rope tightened Read the manual before handling Risk of dragging fingers and hand palm into the machine...
-
Page 14: About The Product
Operator’s Manual – Spider CROSS LINER 4 ABOUT THE PRODUCT 4.1 MAIN COMPONENT LOCATION FUEL TANK CAP SAFETY BEACON FUEL TANK CAP BEZPEČNOSTNÍ MAJÁK CENTRAL STOP CENTRAL STOP INTAGRATED STABILIZING REMOTE WINCH* CONTROL INTAGRATED *Not included in the LITE version... -
Page 15: Use Of The Mower
Operator’s Manual – Spider CROSS LINER 4.2 USE OF THE MOWER The mower is designed to be used for mowing grasslands on flat and sloping terrain under normal conditions. The mower's work normally involves mowing or mulching while driving forward, backward and turning. The mower is operated by one person via a remote radio controller. -
Page 16: Prohibited Use
Operator’s Manual – Spider CROSS LINER 4.4 PROHIBITED USE The mower must not be used for any purpose other than that for which it is intended. The mower must not be used on areas with glass particles, stones, iron or other unwanted objects that may be thrown by the rotating blade or which may damage the mower. -
Page 17: Remote Controller (Rc)
Operator’s Manual – Spider CROSS LINER 4.6 REMOTE CONTROLLER (RC) CENTRAL STOP Two red colored CENTRAL STOP buttons are used to switch the mower off. One is located on the mower (1), the other on the remote control (RC) (2). - Page 18 Operator’s Manual – Spider CROSS LINER REMOTE CONTROLLER ENGINE’S RPM DRIVING SPEED CONTROL RANGE RABBIT/TURTLE DRIVING SPEED ENGINE’S RPM ACTIVATION RANGE SKID CONTROL SWITCH RABBIT/TURTLE STEERING ACTIVATION SKID SWITCH STEERING MOWING DECK – MAIN SWITCH BLADE ON/OFF SWITCH MAIN SWITCH ENGINE START/STOP MOWING DECK –...
-
Page 19: Control Unit And Wiring Harness
LCD DISPLAY CONTROL UNIT – PREMIUM VERSION SERVICE BUTTON/LIGHT The SPIDER CROSS LINER – PREMIUM VERSION mower is equipped with a control unit with an LCD display, a control button and a service connector. The display provides SERVICE KEY CONNECTOR information on service intervals, operating hours, radio signal status and possible system errors. - Page 20 Operator’s Manual – Spider CROSS LINER LITE CONTROL UNIT The SPIDER CROSS LINER – LITE version, is equipped with a control unit with a service key connector for switching to service mode when necessary. It does not include the LCD display or control button.
-
Page 21: Operation
Operator’s Manual – Spider CROSS LINER The following status icons appear on the right side of the display: Status icon Meaning The service interval is approaching (for service intervals, see chapter 8.2) The radio connection to the controller was not established or was lost. -
Page 22: Starting The Engine
Operator’s Manual – Spider CROSS LINER MOWING SYSTEM Check the condition of the blade (The blade must be sharpened and free of any deformations). Check the blade screw for tightness. SAFETY ELEMENTS Check the function of both CENTRAL STOP buttons, remote control and signal transmission. -
Page 23: Stopping And Parking
Operator’s Manual – Spider CROSS LINER Set the engine RPM control to maximum Hold the switch to the start position and hold it in this position until the engine starts. ENGINE START/STOP SWITCH After starting the engine let the machine stand for 2 minutes until the engine is sufficiently warmed-up. -
Page 24: Driving The Machine
Operator’s Manual – Spider CROSS LINER 3) Switch the cutting deck switch to "OFF BLADE". MOWING DECK OFF 4) Hold the switch to the engine OFF position. ENGINE STOP VYPNUTÍ MOTORU CENTRAL STOP 5) Press the CENTRAL STOP on the mower. -
Page 25: Cutting Blade On/Off
SPIDER MODE The mower is equipped with a unique SPIDER mode control system (also known as the “dance step”), thanks to which all 4 wheels turn a full 360° unlimited, so there is no need to rotate the machine if you need to change direction. -
Page 26: Mowing Height Adjustment
Operator’s Manual – Spider CROSS LINER 5.6 MOWING HEIGHT ADJUSTMENT The mowing height can be adjusted in 4 position between 45 - 110 mm. The cutting height is adjusted using the lift handle on the mower. Only adjust the cutting height when the mowing deck is switched off. -
Page 27: Hydraulic Stabilizing Winch
Operator’s Manual – Spider CROSS LINER 5.8 HYDRAULIC STABILIZING WINCH* The mower is equipped with an integrated stabilizing hydraulic winch (hereinafter referred to as "winch"), which is designed as a stabilizing device and improves the mower’s stability on a slope. It prevents the mower from sliding downhill and reduces soil erosion. - Page 28 Operator’s Manual – Spider CROSS LINER MAIN COMPONENTS CONTROL LEVER CONTROL LEVER GUIDING FRAME ROPE GUIDING FRAME ROPE CARABINER CARABINE *Not included in the LITE version WINCH CONTROL POWER ON To switch the winch on, set the valve lever to position 1 to activate the hydraulic oil inlet to the winch hydraulic motor.
- Page 29 Operator’s Manual – Spider CROSS LINER WINCH ANCHORING PROCEDURE 1) Drive the mower to the chosen area and place it on level ground under the slope you intend to mow, directly below the anchoring point 2) Turn the mower wheels perpendicular / across to the slope.
- Page 30 Operator’s Manual – Spider CROSS LINER DRIVING METHOD WITH USE OF THE WINCH WARNING Driving on a slope places a number of demands on the operator, and during the movement on the slope, the operator must constantly evaluate information about the movement of the machine and the characteristics of the terrain.
-
Page 31: Storage
Operator’s Manual – Spider CROSS LINER 6 STORAGE 6.1 CLEANING • Before cleaning the machine, turn the engine off and wait for it to cool down. • Cleaning the machine with high water pressure is not recommended. Pressurized water can enter the electrical parts, carburetor or air filter and cause the mower to fail. -
Page 32: Refueling The Machine
Operator’s Manual – Spider CROSS LINER 6.3 REFUELING THE MACHINE SAFETY PRINCIPLES • Choose a well-ventilated area for refueling. • Do not refuel while the engine is running or when parts of the mower have a high temperature. Always wait until the mower temperature cools down. -
Page 33: Maintenance
Operator’s Manual – Spider CROSS LINER 8 MAINTENANCE The SPIDER CROSS LINER mower has been designed to be safe to work in demanding conditions while being productive and economical. Regular attention must be paid to regular maintenance. Neglecting maintenance can damage the machine and can even make the mower dangerous for both the operator and his surroundings. -
Page 34: Maintenance Schedule
Operator’s Manual – Spider CROSS LINER Oil Storage Lubricants should always be stored so that children do not have access to them. Never store the lubricant in open or unlabeled containers. HANDLING OIL AND LUBRICANTS ATTENTION The hydraulic oil temperature will be high right after the engine stops. Wait until it has cooled down before starting maintenance. - Page 35 Operator’s Manual – Spider CROSS LINER Some service requirements must be done by qualified technicians. Such operations are labeled with the letter “S” in the following maintenance chart. MOWER MAINTENANCE CHART First Every 3 Every 6 Every X = Operator...
-
Page 36: Mower Service Positions
Operator’s Manual – Spider CROSS LINER 8.3 MOWER SERVICE POSITIONS The Spider Cross Liner offers two different service positions VERTICAL SERVICE POSITION The vertical service position is used for cleaning and maintenance of the cutting device. The mower must be placed in this position on a firm and level surface only for the duration of the service. - Page 37 Operator’s Manual – Spider CROSS LINER HORIZONTAL SERVICE POSITION í PROCEDURE: í Place the mower on a level and solid surface. Switch off the mower and the remote control. Unlock and adjust of the cutting height lever to the lowest possible level so that the mowing platform is...
-
Page 38: Service Points
Operator’s Manual – Spider CROSS LINER 8.4 SERVICE POINTS ENGINE AREA OIL FILLER CAP/ DIPSTICK SPARK PLUG OIL DRAIN PLUG ELECTRIC STARTER AIR filter CONTROL FUEL VALVE LEVER LEVER WARNING Dust particles in the air or light explosive material (e.g. straw, grass, sawdust, etc.) must not accumulate in the engine and exhaust area. - Page 39 Operator’s Manual – Spider CROSS LINER MOWER – SERVICE POINTS HEIGHT OF CUT HANDLE CONTROL UNIT MADLO ZDVIHU CONTROL WHEEL UNIT PORTAL PORTÁL CHASSIS FUEL TANK WINGS FUEL SYSTEM KŘÍDLA HYDRAULIC TANK HYDRAULIC WINCH GUIDE SYSTEM STABILIZING WINCH* STABILIZING WINCH...
-
Page 40: Geometry Adjustment
Operator’s Manual – Spider CROSS LINER 8.5 GEOMETRY ADJUSTMENT The geometry is adjusted mechanically. The mower operator evaluates whether the geometry needs to be adjusted or not. If you do not have the necessary equipment and experience, have this work done by a specialist. - Page 41 Operator’s Manual – Spider CROSS LINER GEOMETRY ADJUSTMENT FOR MACHINES WITHOUT SKID-STEERING Place the mower in a horizontal service position so that the frame is in contact with the floor and the wheels are free from the ground. Turn the wheels until one of the sides is parallel when a straight bar is pressed against the wheel portals.
-
Page 42: Engine Maintenance
Operator’s Manual – Spider CROSS LINER 8.6 ENGINE MAINTENANCE Before starting any maintenance work on the mower, switch off the engine, press the CENTRAL STOP emergency button on the mower and on the remote control. To prevent the engine from starting unexpectedly, disconnect the (-) terminal on the battery. - Page 43 Operator’s Manual – Spider CROSS LINER ENGINE AIR FILTER A dirty air cleaner will restrict air flow to the carburettor, reducing engine performance. If you operate the engine in very dusty areas, clean the air filter more often than specified in the MAINTENANCE SCHEDULE.
- Page 44 Operator’s Manual – Spider CROSS LINER Foam air filter element: Clean in warm soapy water, rinse, and allow to dry thoroughly. Or clean in non- flammable solvent and allow to dry. Dip the filter element in clean engine oil, then squeeze out all excess oil. The engine will smoke when started if too much oil is left in the foam.
-
Page 45: Fuel Systém
Operator’s Manual – Spider CROSS LINER CLEANING THE ENGINE Make sure that no dirt accumulates in the engine compartment. Pay special attention to the area of the exhaust where no flammable material must be present. If the engine has been running, allow it to cool for at least half an hour before cleaning. Clean its surface, repair any damage to the paint and paint the areas prone to corrosion with a thin layer of oil. -
Page 46: Mowing Blade
Operator’s Manual – Spider CROSS LINER 8.8 MOWING BLADE Check the condition of the blade regularly: Cannot bear traces of damage such as bending, or other deformations. It must be securely fastened to the blade hub with fixing screw. -
Page 47: Hydraulic System
7) Tighten hydraulic tank cap and place covers back on machine. 8.10 HYDRAULIC STABILIZING WINCH* * Not included in the Cross Liner Lite version ROPE MAINTENANCE Before each shift, check the condition of the rope, especially if you have been working in terrain where unwanted objects, sharp edges, etc. -
Page 48: Electrical System
Operator’s Manual – Spider CROSS LINER WARNING Do not directly expose the tow rope to hot / warm objects. MOUNTING THE CARABINER Lead the rope through the lashing ring, write an eight figure around the fixed end and thread it through as shown in the picture. - Page 49 Operator’s Manual – Spider CROSS LINER Service mode Service mode is used to set up and adjust the mower. In service mode, the mower behaves the same as in normal mode, but has the following safety functions suppressed: Mower tilt detection ...
- Page 50 RF signal lost Display warning with audible alarm * Shutdown of the machine = serious error, the mowing unit and the combustion engine of the machine will be switched off, in this case contact an authorized SPIDER service center. 50 / 62...
- Page 51 CHARGING THE RC BATTERY 1. Slide the battery from the controller 2. Connect the charger to the car cigarette lighter socket. 3. Insert the battery into the charger (the green and orange LEDs lights are on and the battery is charging). 4.
-
Page 52: Neutral Position Adjustment
Operator’s Manual – Spider CROSS LINER BATTERY TESTING The best and easiest way to test the battery is to use a voltmeter or a multimeter to measure the resting voltage. If you know the exact voltage, use the table below to determine the charge. -
Page 53: Drive Belts And Stering Chains
Operator’s Manual – Spider CROSS LINER 8.13 DRIVE BELTS AND STERING CHAINS HYDRAULIC PUMP AND MOWING UNIT BELTS WARNING Make sure the engine is switched off before changing the belt. Remove the key from the CENTRAL STOP before checking the belt tension. - Page 54 Operator’s Manual – Spider CROSS LINER DRIVE BELTS AND STEERING CHAINS INSPECTION 1) Place the mower on a flat and firm surface, press CENTRAL STOP on both the controller and the mower and remove the key 2) Remove the engine cover and the side covers (4x screw - use a 17 mm socket with an extension).
-
Page 55: Wheel Portals
Operator’s Manual – Spider CROSS LINER 8.14 WHEEL PORTALS The wheel suspension drive contains an automatic tensioning segment and therefore does not need to be adjusted. If the chains need to be replaced, contact an authorized service center. 8.15 LUBRICATION Apply a reasonable amount of lubricant to the parts to be lubricated. -
Page 56: Mowing Height Adjustment
Operator’s Manual – Spider CROSS LINER 8.18 MOWING HEIGHT ADJUSTMENT Keep rack and lift lever parts clean, undamaged and without excessive play. The control cords must be slightly overstretched. Replace the cord if it is damaged. SPRING SOCKET STŘELKA S PRUŽINOU... -
Page 57: Technical Data
Operator’s Manual – Spider CROSS LINER 9 TECHNICAL DATA 9.1 FLUIDS, LUBRICANTS AND FILLING VOLUMES WARNING In the event of any unauthorized fuel types (or their equivalents) being used at any time, the producer disregards any liability for engine damage or failure. - Page 58 Operator’s Manual – Spider CROSS LINER NOISE EMISIONS The mower emits the following noise: Sound power LWA = 95,8 dB Guaranteed sound power level LWA = 98 dB The measurement was carried out according to ISO 3744 58 / 62...
-
Page 59: Troubleshooting
Operator’s Manual – Spider CROSS LINER 10 TROUBLESHOOTING 10.1 MOWER TROUBLESHOOTING Failure Probable cause Repair Travel joystick is not in the neutral position Move joystick to the neutral position The mower blade lever is in the “on” position Move mower blade lever to the “off” position... -
Page 60: Winch Troubleshooting
Operator’s Manual – Spider CROSS LINER 10.2 WINCH TROUBLESHOOTING Failure Probable cause of failure Repair The drum is not rotating Lack of oil in the hydraulic system of the machine Add hydraulic oil Jerking motion of the drum Lack of oil in the hydraulic system... -
Page 61: Warranty Conditions
(“Spider”) to the original purchaser of new equipment from Spider or authorized Spider Distributors/Dealers. Under these warranties Spider will repair or replace, at its opinion, any covered part which is found to be defective in material or workmanship during the applicable warranty term. Warranty service must be performed by a Distributor/Dealer or service center authorized by Spider to sell and/or service the type of equipment involved, which will use only new or remanufactured parts or components furnished by Spider. - Page 62 11. The selling Distributor/Dealer has no authority to make any warranty, representation, condition or promise on behalf of Spider, or to modify the terms or limitations of this warranty in any way and makes no warranty on any other item unless it delivers to the purchaser a separate written certificate specifically warranting the item.
Need help?
Do you have a question about the CROSS LINER and is the answer not in the manual?
Questions and answers