Lancom R&S Unified AGPO150 Migration Manual page 9

Upgrade procedure
In the following chapters you will find instructions for upgrading your
LANCOM R&S
Installed version
≥10.0
9.8
9.7
9.6
9.5 / 9.4
< 9.4
8
LANCOM Installation Guide – Upgrade procedure
Unified Firewall toLCOS FX 10.4:
®
Chapter
Refer to the LCOS FX User Manual under "Update settings" for more
information on upgrading your LANCOM R&S
LCOS FX 10.4 using the web client.
Chapter "Upgrading the LANCOM R&S
versions 9.6 and 9.8" on page 9
Note: Contact our sales department if your device is not listed under
supported devices.
Note: An upgrade of the LANCOM R&S
FX 10.4 is not supported by version 9.7. Instead, a complete
reinstallation has to be performed. In the chapter "Installing LCOS
FX 10.4 from a USB stick" on page 11 you will find information
on the manual installation of LCOS FX 10.4.
Chapter "Upgrading the LANCOM R&S
versions 9.6 and 9.8" on page 9
Chapter "Upgrading the LANCOM R&S
versions 9.4 and 9.5" on page 10
Chapter "Upgrading the LANCOM R&S
version 9.4" on page 13
Unified Firewall to
®
Unified Firewall from
®
® Unified Firewall to LCOS
Unified Firewall from
®
® Unified Firewall from
Unified Firewall prior to
®