Advertisement
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Lancom R&S Unified AGPO150
- Page 1 LANCOM R&S®Unified Firewalls Migration Guide...
- Page 2 The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from LANCOM Systems. We reserve the right to make any alterations that arise as the result of technical development.
-
Page 3: Table Of Contents
LANCOM Installation Guide – Table of Contents Table of Contents Copyright Introduction Target group Chapter overview To be checked before the upgrade Supported devices Removed functions Manual settings Upgrade procedure Upgrading the LANCOM R&S Unified Firewall from versions 9.6 and 9.8 ®... -
Page 4: Introduction
LANCOM R&S Unified Firewall. ® Chapter overview The contents of this document will assist you in upgrading your LANCOM R&S Unified firewall and in the steps required after the upgrade. ® This document contains the following chapters: A Chapter “To be checked before the upgrade“... -
Page 5: Upgrading The Lancom R&S
LANCOM Installation Guide – Introduction A Chapter “Upgrading the LANCOM R&S Unified Firewall from versions ® 9.4 and 9.5“ on page 10 Upgrade information for versions 9.4 and 9.5 of the LANCOM R&S Uni- ® fied Firewall A Chapter “Upgrading the LANCOM R&S Unified Firewall prior to version ®... - Page 6 A After the upgrade, configure the high availability settings of both devices as described in the LANCOM R&S Unified Firewall user ® manual. A As from LCOS FX 10.2, a centralized management of the LANCOM R&S Unified Firewall is only possible via the LANCOM R&S ® ®...
- Page 7 LANCOM Installation Guide – To be checked before the upgrade Supported devices LCOS FX 10.4 is supported by the following devices: A GPO150 A GPA300/500 A GPX850 A GPZ1000/2500/5000 A UTM+100/200/300/500/800/1000/2000/2500/5000 A NP+200/500/800/1000/2000/2500/5000 A GP-U 50/100/200/300/400/500 A GP-E 800/900/1000/1100/1200 A GP-S 1600/1700/1800/1900/2000...
- Page 8 LANCOM Installation Guide – To be checked before the upgrade Manual settings The following settings are not updated automatically when upgrading to LCOS FX 10.4. After the upgrade, reconfigure these settings according to your requirements. A High availability A Monitoring A Traffic shaping and QoS A Application filter - valid for version 9.6...
- Page 9 9.6 and 9.8“ on page 9 Note: Contact our sales department if your device is not listed under supported devices. Note: An upgrade of the LANCOM R&S ® Unified Firewall to LCOS FX 10.4 is not supported by version 9.7. Instead, a complete reinstallation has to be performed.
- Page 10 Upgrading the LANCOM R&S Unified Firewall from ® versions 9.6 and 9.8 If the upgrade process is interrupted, the LANCOM R&S Unified ® Firewall can be damaged. Do not power off the device during the upgrade process. Only restart the device if you are explicitly requested to do so.
- Page 11 If the upgrade fails or the device reboots and the old version is still installed, please refer to the log files for further information. For information on how to access the web client of the LANCOM R&S Unified Firewall, refer to chapter “First steps“ on page 15.
-
Page 12: Installing Lcos Fx 10.4 From A Usb-Stick
LANCOM Installation Guide – Upgrade procedure Installing LCOS FX 10.4 from a USB stick If the upgrade process is interrupted, the LANCOM R&S Unified ® Firewall can be damaged. Do not power off the device during the upgrade process. Only restart the device if you are explicitly requested to do so. -
Page 13: Upgrading The Lancom R&S
If the upgrade fails or the device reboots and the old version is still installed, please refer to the log files for further information. For information on how to access the web client of the LANCOM R&S Unified Firewall, refer to chapter ”First steps“ on page 15. - Page 14 Tip: For some patches, a device restart is required. Please refer to the corresponding patch description for further information. A Each software version of the LANCOM R&S®Unified Firewall requires a particular version of the gateprotect administration client. This can be downloaded under https://mygateprotect.com.
- Page 15 2. As soon as you have upgraded to version 9.4, you can continue with the steps in the chapter “Upgrading the LANCOM R&S®Unified Firewall from versions 9.4 and 9.5“ on page 10. If the upgrade fails or the device reboots and the old version is still installed,...
-
Page 16: First Steps
A To agree to the EULA, select “Accept & Login“. The web client will be opened. For information on the first steps with LCOS FX 10.4 on the LANCOM R&S Unified Firewall, refer to the operating manual. You can find the ®... -
Page 17: Contact, Service, And Support
LANCOM Installation Guide – Contact, Service & Support Contact, Service & Support You can get support from the following sources: A LANCOM R&S Unified Firewall operation manual ® A Our distribution partners A LANCOM Support (https://www.lancom-systems.com/service-support/ support-garantie/support-kontakt/)
Need help?
Do you have a question about the R&S Unified AGPO150 and is the answer not in the manual?
Questions and answers