First Steps - Lancom R&S Unified AGPO150 Migration Manual

First steps

After having installed LCOS FX 10.4, you can access the LANCOM
R&S Unified Firewall as follows:
®
A Open your browser.
A In the browser's address bar, enter <IP address>:3438.
Replace here <IP address> by the current IP address of your LANCOM
R&S
®
A Create an exception for the certificate warning.
The login page of the LANCOM R&S
A Enter the same credentials that you have previously used in the gatepro-
tect administration client.
A Click on "Login".
A After login, you will be asked to agree to the End User License
Agreement (EULA).
A To agree to the EULA, select "Accept & Login".
The web client will be opened.
For information on the first steps with LCOS FX 10.4 on the LANCOM
R&S Unified Firewall, refer to the operating manual. You can find the
®
operating manual under "Help" in the upper right corner of the screen. It
provides a general introduction to the software and detailed descriptions
of the configuration dialogs.
15
Unified Firewall.
LANCOM Installation Guide – First steps
Unified Firewall appears.
®